 |
Solutions
Solution by Type >> Rubber to Metal / Rubber to Plastic
Custom Rubber Corp. has a history of working with customers to determine
the method for assembly that keeps cost low and performance high. No
one better understands the relationship between rubber, metal, adhesives
and paints. That means we can fine-tune every element, so your system
works in the final application. We're proven experts in working
with all metals, including brass, aluminum and steel. Customers in companies
large and small count on Custom Rubber for:
- Rubber-encapsulated
metal - The most economical mechanical bond.
- Chemical bonding - We specify and apply the appropriate heat-activated
adhesive for bonding during vulcanization or curing, relying on our
experience with custom masking.
- Cynoacrylate bonding of rubber and metal
after curing - This includes secondary operations to assemble.
|
Surgical instrument requires calling in a development expertise
An innovator of surgical instruments turned to Custom Rubber Corp. to manage
several manufacturing challenges. First, the instrument handles required
bonding silicone rubber to aluminum, which necessitates a special adhesive
for long-lasting durability. In addition, the color and texture of the handle
were critical design factors, requiring precise Pantone color matching and
careful mold and material design. The handle developed for the first instrument
is now slated for expansion to other products in the line.
Below are pictures of examples (click on the thumbnails for larger images).
None of the parts pictured are in stock or for sale. These are all examples
of custom-manufactured products that illustrate Custom Rubber Corp.'s capabilities. Contact
us with information on your needs.

Shock Foot
Assembly |

Exhaust Seal
Assembly with
Nylon Insert |

Hood Leveler |

Non-Marking Leveling
Feet Encapsulated
Washer |

Geared Bumper with
Locking Grommets |

Metal Vacuum Seal
Ring with Bonded
Rubber Bead |

Silicone Handle for
Medical Instrument |

Color-Coded Electrical
Connector for
1,000 Amp Application |

Rubber to Metal
Encapsulated |

Six (6) Inch Roller |

Bottling Line Roller |

Target Carrier for
Shooting Range |

Transformer Housing |

Masonry Saw Table |

Foot Pads
|

Isolators |

Shut-Off Seals |

Molded-In Plastic
Inserts |

Large Bumpers |

Muffler Hangers |

Grommet with
Installed, Press-Fit
Metal Sleeve |

100 lb. Rubber
Coupling with
Three Metal Inserts |

Temperature
Resistant
Sealing Strip |

Silicone Medical
Instrument Handle |
None of the parts pictured are in stock or for sale. These
are all examples of custom-manufactured products that illustrate Custom Rubber
Corp.'s capabilities. Contact us with information
on your needs.
See Other Products
|